Suburban - Panel
Misc. Rubber FREE
SHIPPING ON ORDERS OVER $500.00
( Does not include oversized bulky items with a fixed
shipping cost or truck freight items, offer applies to the
continental USA. )
WARNING: Cancer & Reproductive Harm -
www.P65Warnings.ca.gov
Descriptions
in Blue are
hyperlinks to pictures and or larger description.
Left = Drivers Side, Right = Passengers Side
Correct
style & fitting hood to cowl seal, ours won't hold the back of your
hood up like the others do!!
Proudly Made In the
USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Truck, Blazer, Jimmy, Suburban, Panel Correct style & fitting hood to
cowl foam end seals, these install on either end of the hood to cowl seal
under cowl edge sealing entire cowl to cab area not covered by hood to
cowl seal. Includes 2, 1 each for left and right side.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
$3.00
Rubber
Hood Pad Set 67-72 Hoods All
Set
132059
or 19723938
Hood
Rubber Pads. These Fit Between Inside Hood Brace And Outer Hood Skin
(Eliminate that annoying Hood vibration while driving).
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
$18.00
67-72
Rubber Floor Shifter Boot
Each
132077-4
or 19723941
67-72
4spd rubber floor shifter boot. Specify if 1967 6cyl 2wd, 68-72 6Cyl.2wd,
68-72 V8 2wd, 67 4wd, 68-72 4wd in comments section on order form at
bottom of shipping info form. NOTE: A very limited number of models were equipped with a SM435
transmission which is a 4spd Close Ratio transmission, the shifter boot
for these is rectangular and is not reproduced.
1967-72
Outer rocker plug, goes in hole at front of rocker, black in color, just
like original's. Sold each, specify quantity after adding to cart.
Proudly Made In the USA Fits: All 1967-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy /
GMC Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Door hole plastic plug. Hole plug that goes
in hole at rear of door. 1
required per door. These are also correct for 1967-72 Suburban
with tailgate & rear hatch to cover the unused cargo door hinge bolt
holes. Sold each, specify quantity in cart. Manufacturer has
discontinued making the silver version of this plug in early
2018.
We had a limited supply of Silver plugs left and have
depleted all silver versions so all future plugs will be Black. Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
67-70
OEM Firewall clutch delete plug, can also be used on all 1971-72 model
years also ( 1971-72 models originally used a metal plate with foam behind
it to seal the clutch rod hole ). Used to seal the clutch rod push rod
firewall hole oval opening on models with a automatic transmission. Made
by the original manufacturer that produced them for GM.
Proudly
Made In The USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1971-72
Chevy & GMC truck, 1971-72 Suburban, 1971-72 Chevy Blazer, 1971-72 GMC
Jimmy original style Firewall clutch delete plate and sponge rubber seal, can also be used on all
1967-70 model
years ( 1967-70 models originally used the above plastic clutch delete
plug ). Used to seal the clutch rod push rod
firewall hole oval opening on models with a automatic transmission.
67-72
Fuse Block Firewall Gasket. 2 required per truck, 1 installs inside cab
another installs outside on firewall.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
Replaces
all your cracked, broken, torn or missing firewall grommets and firewall
insulation pad retainers with these high quality replacements. Set
includes: 1-windshield washer 3 hole grommet, 2-windshield washer hose
single hose grommets, 1-oil pressure line grommet, 1-speedometer cable
grommet, 1-emergency brake cable grommet, and 7-rubber firewall insulation
pad retainers.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
67-72
Parking brake cable grommet. Rubber grommet that seals around parking
brake cable as it passes through the firewall. Exactly like OEM.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Windshield washer spray nozzle cowl grommets, includes 2 rubber grommets
to replace those found on cowl where washer hoses pass thru cowl to
connect to washer spray nozzles.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Windshield washer hose 3 hole firewall grommet. Seals around windshield
washer hoses running from and to washer pump as they pass through firewall
to keep the elements out. Looks just like original after installation but
seals better do to a improved design to mating surfaces. Manufactured from
the highest quality MBR/PVC rubber, with antioxidants & UV ray
protectors added added for extreme durability. This grommet seals
better than the originals, resists oil & sun damage and will not
degrade with time.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Oil pressure line firewall grommet. Seals around oil pressure line as it
passes through firewall to keep the elements out. Looks just like original
after installation but seals better do to a improved design to mating
surfaces. Manufactured from the highest quality MBR/PVC rubber, with
antioxidants & UV ray protectors added added for extreme durability.
This grommet seals better than the originals, resists oil & sun damage
and will not degrade with time. Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Speedometer cable firewall grommet. Seals around speedometer cable as it
passes through firewall to keep the elements out. Looks just like original
after installation but seals better do to a improved design to mating
surfaces. Manufactured from the highest quality MBR/PVC rubber, with
antioxidants & UV ray protectors added added for extreme durability.
This grommet seals better than the originals, resists oil & sun damage
and will not degrade with time.
Proudly
Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Firewall insulation pad retainers in rubber just like original. Replace
your missing, cracked or torn firewall insulation retainers with these
high quality rubber retainers. Manufactured from the high quality MBR/PVC
rubber, with antioxidants & UV ray protectors added for extreme
durability. This retainer resists oil and tearing and will stay
flexible for years to come. Truck, Suburban, Panel Truck, Blazer, and
Jimmy require 7 to complete a set.
Proudly Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & 1969-1972 GMC
Blazer
1967-72
Fuel line grommet for in cab tanks where fuel line passes through floor to
exit the cab. For trucks with 3/8" diameter fuel line. 5/16"
version is not available.
Proudly Made In the USA Fits: All With 3/8"
diameter fuel line 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
1967-70
Truck, Suburban, Panel and 1969-72 Blazer, Jimmy Rubber Gas Tank Fuel Neck
Filler Grommet. 2"
inside diameter. This isnot
the inferior import version as sold by the other parts stores that rots in
6months to a year, Exclusive 10 year warranty 5/12/2016 Proudly
Made In the USA
71-72
Truck, Suburban Rubber Gas Tank Fuel Neck Filler Grommet. 1-1/2" Inside Diameter . Not
the bad import version as sold by the other parts stores that rots i n
6months to a year, Exclusive Proudly Made In the USA
10 year warranty 10/1/2012
1967-72
A/C condenser inlet & dehydrator outlet tubes grommet. Looks
just like original after installation but seals better do to a improved
design to mating surfaces. Manufactured from the highest quality MBR/PVC
rubber, with antioxidants & UV ray protectors added added for extreme
durability. This grommet seals better than the originals, resists
oil & sun damage and will not degrade with time.
Proudly Made In the USA Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
1967-70
Mirror Arm Gasket.
Fits: All 1967-70 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-70 Suburban and 1969-70 Chevy & 1970-1972 GMC
Blazer
$2.00
70-72
Deluxe Mirror Arm Gasket
Each
308625
or 19723984
70-72
Deluxe Mirror Arm Gasket. Select Left, Right or Both in cart.
Fits: All 1970-72 C/K Chevrolet / GMC Truck, 1970 Chevy / GMC
Panel Truck, 1970-72 Suburban and 1970-72 Chevy & 1970-1972 GMC
Blazer
1967-72
Truck, Suburban, Blazer, Jimmy & panel truck Rubber wiper motor seal. Seal
located on wiper motor shaft that seals to the reinforced
rubberized tar impregnated wiper motor seal. Exactly
like OEM.. Manufactured from the highest
quality MBR/PVC rubber, with antioxidants & UV ray protectors added
added for extreme durability. This grommet seals better than the
originals, resists oil & sun damage and will not degrade with time.
Replace your motor seal to eliminate that
irritating leak under your dash when it rains caused from your original
becoming cracked and brittle.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
1967-72
Truck, Suburban, Blazer, Jimmy & panel truck fiber
reinforced rubberized tar impregnated wiper motor seal. Seal
located between firewall and wiper motor.
Replace your motor
seal to eliminate that irritating leak under your dash
when it rains caused from your original becoming cracked
and brittle.
Proudly
Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy &
GMC Blazer
1967-72
Steering Column To Dash Seal. Highest quality available and exactly like
OEM.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
$7.95
67-72
Steering Column To Firewall Seal
Each
215092
or 19723998
1967-72
Steering Column To Firewall Seal Correct Rubber Seal.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
67-72
Cowl door kick panel vent seals, a pair of seals to replace the foam seals
located on your interior kick panel fresh air vent doors.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
This is
the boot that mounts to the firewall where the brake pedal rod goes
through the firewall to the power booster assembly. Made with a improved rubber
compound to better resist the elements, oil, & heat not the inferior
imported version.
Proudly
made in the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
This is
the boot on the end of the master cylinder where the actuator rod goes
through the firewall.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
1967-72
Power Booster Boot Seal. This is the boot seal on the rear of the power
brake booster, that the actuator rod goes through, and has 5 vent holes
surrounding the center hole the rod passes through.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
1967-72
Front fender dust shields. Includes dust shields for both left and
right front fenders, and hardware to install. Found at the inside rear of
the front fenders.
Proudly Made In the USA
Fits: All 19
67-72 C/K Chevrolet / GMC Truck, 1967-70 Chevy / GMC
Panel Truck, 1967-72 Suburban and 1969-72 Chevy & GMC Blazer
Chevy Truck Parts | Chevrolet Truck Parts | GMC Truck
Parts | Chevy Truck Part | GMC Truck Part | Classic Truck Parts | Classic Chevy
Truck Parts | Classic GMC Truck Parts | Chevrolet Truck Part |
Used Chevy Truck Parts | Used GMC Truck Parts | Chevy Truck Restoration Part |
GMC Truck Restoration Part | Chevy Truck Body Parts | GMC Truck Body Parts
|Classic Truck Part | Classic Chevy Part | Custom Chevy Truck Part | Classic
Chevy Truck Part | Chevy Pickup Parts | Chevrolet Truck Body Part | Antique
Chevrolet Truck Part | Classic Chevrolet Truck Part | Chevy Restoration Part |
GMC Restoration Part | Chevrolet Pickup Parts | Chevy Pickup Part | GMC Pickup
Parts | GMC Pickup Part | Truck Restoration | Old Truck Parts | Pickup Truck
Parts | Chevrolet Suburban Parts |
Chevy Suburban Part | GMC Suburban Parts | Chevrolet Blazer Parts | Chevy Blazer
Parts | GMC Jimmy Parts | GMC Jimmy
| Chevrolet Panel Truck | Chevy Panel Truck | GMC Panel Truck
C5 Blazer | K5 Blazer | Chevy Silverado | GMC Sierra I Tahoe I Yukon