1967-72
Front upper windshield a-frame center section roof bow drip rail. Replaces
the the front drip rail section at roof edge that spot welds to the roof
and upper windshield frame that sits between the front windshield
A-pillars. Original gauge steel construction. Ships oversized and has
separate shipping charges from other items in order
1967-72
Truck, 1969-72 Blazer & Jimmy Door vent shade kit. These
stainless steel door visor's were a factory accessory that could
be added to any truck or Blazer / Jimmy when it was ordered.
Mounts on the left and right side top of door window opening to
shield you and your passengers from sunlight glare and also allows
the door side windows to be rolled down partially for
ventilation when it is raining out while driving to prevent rain
from entering cab. Sold in kit form with all mounting hardware
required to install.
1972
Door inner door skin to outer door skin reinforcement screws and
bezels. 4 piece set does both 1972 front doors, this screw and bezel
was used on 1972 doors only directly below the window opening rear to
reinforce the inner to outer door skin gap to prevent it from changing
width of opening due to opening and closing of the vent window.
Exactly like the originals in every detail.
1967-72
truck, Suburban, 1969-72 Blazer & Jimmy and 1967-70 Panel truck vent door
assembly. Complete assemblies exactly like originals. Includes door, handle
& actuating mechanism. Sold individually select Left ( Drivers ) Right (
Passenger ) or Left & Right in cart.
1967-72
High hump transmission cover. Removable high hump transmission
cover used on 1967-72 truck, Suburban, 69-72 Blazer, Jimmy and
67-70 Panel truck. Used on all 4 wheel drives and big block 2
wheel drives. Exactly like original in every detail fit, form
and 19 gauge steel construction. Due to the many configurations
of transmissions used with differing shifter hole locations the
holes will need cut for shifter opening.
$95.00
1967-68
GMC Grill Top Bar NEW PRODUCT
Each
16387326
1967-68
GMC grill top bar. These are 100% Exact reproductions of the OEM
top bar for 1967-68 GMC grilles. Coated in a EDP applied black
primer finish. Includes both end brackets pre-installed at
either end for attaching to grill and fenders. Can be used on
1967 lower grille, 1968-70 lower grille, and 1971-72 lower
grille but when used on 69-72 GMC's a 67-68 style hood must be
used. This item ships Oversized II
in its own specially designed box to prevent damage and has
separate shipping charges.
1971-72
Front Bumper For GMC, exactly like original. All New EDP painted
black Steel Stampings. This item
ships Oversized II and has separate shipping charges.
1967-72
Suburban & 1967-70 Panel rear lower front quarter panel
section. Replaces area behind front drivers door to midway point
on rear wheel arch. Made from original heavy gauge 19ga steel
formed exactly like original with 1/8" rolled bead on edge
of wheel arch opening and bottom lower flange to attach inner
quarter panel to. This item ships Oversized II and has separate
shipping charges. 57" X 20" X 2"
$115.00
PANEL
TRUCK OWNERS- By using a combination of the above drivers side
patch panel & the below passenger side you can cut &
graft the 2 panels together in order to repair the passenger
side on the Panel truck.
1967-72
Suburban passenger side rear lower front quarter panel section.
Replaces area behind rear passenger side door to midway point on
rear wheel arch. Made from original heavy gauge 19ga steel
formed exactly like original with 1/8" rolled bead on edge
of wheel arch opening and bottom lower flange to attach inner
quarter panel to. This item ships Oversized I and has separate
shipping charges. 24" X 20" X 2" PANEL TRUCK OWNERS- By using a
combination of the above drivers side patch panel part #
15761311 & this passenger side panel part # 15761313 you can
cut & graft the 2 panels together in order to repair the
passenger side on the 1967-70 Panel truck.
1969-72
Blazer / Jimmy upper windshield top header repair set. 5 piece
set needed to repair the upper windshield frame for the 69-72
Blazer & Jimmy. precise reproduction of the original in
original gauge steel coated in a EDP applied black primer
finish. Now you can easily repair your Blazer or Jimmy upper
windshield frame with this new 5 piece set. Ships Oversized II
in its own specially made box and requires separate shipping
costs from other items in order. Box size 62" X 9" X
8"
1969-72
Blazer or Jimmy Complete cargo floor assembly, this is a
original 18 gauge stamped steel cargo bed floor with all under
bed cross-sills attached to the floor with all mounting holes
pre-punched. Painted in a EDP applied black primer just paint
and install on your Blazer or Jimmy. TOP
VIEW
BOTTOM VIEWWe
will contact you with freight costs by email before shipping for
approval or email us at
1969-1972
GMC Truck, 69-72 GMC Suburban & 69-70 GMC Panel truck
radiator core support for GMC's
This item ships UPS Oversized III and has separate shipping
charges.
Chevy Truck Parts | Chevrolet Truck Parts | GMC Truck
Parts | Chevy Truck Part | GMC Truck Part | Classic Truck Parts | Classic Chevy
Truck Parts | Classic GMC Truck Parts | Chevrolet Truck Part |
Used Chevy Truck Parts | Used GMC Truck Parts | Chevy Truck Restoration Part |
GMC Truck Restoration Part | Chevy Truck Body Parts | GMC Truck Body Parts
|Classic Truck Part | Classic Chevy Part | Custom Chevy Truck Part | Classic
Chevy Truck Part | Chevy Pickup Parts | Chevrolet Truck Body Part | Antique
Chevrolet Truck Part | Classic Chevrolet Truck Part | Chevy Restoration Part |
GMC Restoration Part | Chevrolet Pickup Parts | Chevy Pickup Part | GMC Pickup
Parts | GMC Pickup Part | Truck Restoration | Old Truck Parts | Pickup Truck
Parts | Chevrolet Suburban Parts |
Chevy Suburban Part | GMC Suburban Parts | Chevrolet Blazer Parts | Chevy Blazer
Parts | GMC Jimmy Parts | GMC Jimmy
| Chevrolet Panel Truck | Chevy Panel Truck | GMC Panel Truck
C5 Blazer | K5 Blazer | Chevy Silverado | GMC Sierra I Tahoe I Yukon