|
Clutch Linkage |
|||
| Descriptions
in Blue are
hyperlinks to pictures and or larger description. Left = Drivers Side, Right = Passengers Side |
|||
| Part # | Description | Price | Quantity |
| #1- Bushing | Each | ||
| Clutch pedal shaft bushing. 2 required per shaft. | $2.95 | ||
| #2- Clutch Pedal Return Spring | Each | ||
| 1910106 | Clutch pedal return spring. | $14.95 | |
| #3- Clutch Pedal Bumper | Each | ||
| Clutch pedal rubber bumper. | $19.95 | ||
| #4,#6,#7,#8- Bolt, Washer, Lock Washer & Nut | Each | ||
| Bolt for clutch shaft lever, with washer, lock washer & nut. | $3.95 | ||
| #5- Clutch Lever | Each | ||
| Clutch lever for pedal shaft. | $15.95 | ||
| #9- Thrust Washer | Each | ||
| Thrust washer for between clutch shaft bushing and clutch shaft lever. | $1.95 | ||
| #10- Nut | Each | ||
| Nut for frame side of pivot ball stud. | $.95 | ||
| #11- Star Washer | Each | ||
| Star washer behind nut and before tang washer at frame bracket for pivot ball shaft. | $.65 | ||
| #12- Tang Washer | Each | ||
| Tang washer behind star nut and before frame bracket for pivot ball shaft. | $2.95 | ||
| #13- Felt Dust Washer | Each | ||
| Felt dust washer to seal from end of pivot ball. 2 Required. | $2.95 | ||
| #14- Frame Side Pivot Ball Stud Retainer Spring | Each | ||
| Frame side pivot ball stud retainer spring. | $1.95 | ||
| #15- Pivot Ball Seat | Each | ||
| Pivot ball seat, total of 2 required, 1 required on base of pivot ball, 1 required at head of pivot ball. | $1.95 | ||
| #16- 1967 Frame Side Pivot Ball Stud | Each | ||
| 1967 Frame side pivot ball stud. | $19.95 | ||
| #16- 1968-70 Frame Side Pivot Ball Stud | Each | ||
| 1968-70 Frame side pivot ball stud. | $19.95 | ||
| #16- 1971-72 Frame Side Pivot Ball Stud | Each | ||
| 1971-72 Frame side pivot ball stud. | $19.95 | ||
| #17- V8 Engine Side Pivot Ball Stud | Each | ||
| 1967-72 V8 engine side pivot ball stud. Excluding 4X4. | $39.95 | ||
| #18- Rod Adjusting Nut | Each | ||
| Rod adjusting nut at bell crank end of clutch fork push rod. 2 required. | $1.45 | ||
| #19- Clutch Fork Push Rod Swivel | Each | ||
| 1910107 | Clutch fork push rod swivel, goes between the 2 rod adjusting nuts at bell crank end of fork push rod. | $21.95 | |
| #20- Fork Push Rod | Each | ||
| Clutch fork push rod, specify 6cylinder, V8SB (excluding 4X4), or V8SB 4X4 | $17.95 | ||
| #21- Clutch Fork "U" Nut | Each | ||
| 1910108 | Push rod to clutch fork "U" nut. | $7.95 | |
| #22- Grease Fitting | Each | ||
| Grease fitting for bellcrank. | $1.65 | ||
| #23- Rod Clip | Each | ||
| Pedal to push rod clip at bellcrank end of rod. | $.95 | ||
| #24- V8 SB Bellcrank | Each | ||
| 1910109 | V8 small block bellcrank. | $59.95 | |
| #25 | Each | ||
| $ | |||
| #26- 8 Cylinder Clutch Pedal To Bellcrank Push Rod | Each | ||
| Push rod running from clutch pedal to bellcrank. | $39.95 | ||
| #26- 6 Cylinder Clutch Pedal To Bellcrank Push Rod | Each | ||
| 1910110 | Push rod running from clutch pedal to bellcrank for inline 6 cylinder with manual transmission. | $39.95 | |
| #27- Clutch Fork Return Spring | Each | ||
| 1910111 | Clutch fork return spring. For all equipped with manual transmission. | $7.95 | |
| #28- Clutch Fork | Each | ||
| Original GM NOS clutch fork. | $44.95 | ||
| #29- Clutch Fork Boot | Each | ||
| 1910112 | Clutch fork boot seal. Seals clutch fork at bell housing from environment to prevent premature clutch failure from moisture & debris. | $10.95 | |
|
Items NOT PICTURED |
|||
| Clutch Fork Pivot Ball Stud | Each | ||
| 1967-72 Clutch Fork Pivot Ball Stud. | $9.95 | ||
| Clutch Fork Pivot Ball Stud Retainer Spring | Each | ||
| 1967-72 Clutch fork pivot ball stud retainer spring. | $1.95 | ||
| 67-72 Pedal Push Rod Through Firewall Boot | Each | ||
| 759700 | 1967-72 Pedal push rod through firewall boot for 3spd & 4spd clutch pedal push rod. | $7.95 | |
| 67-72 Lower Bellhousing Inspection Cover | Each | ||
| 1967-72 Lower bellhousing inspection cover. | $27.95 | ||
| 67-72 Bellhousing Extension Plate | Each | ||
| 1967-72 Bellhousing extension plate, goes between motor and transmission. | $16.95 | ||
| 67-72 Bellhousing To Block Dowel Pin | Each | ||
| 1967-72 Bellhousing to block dowel pins, requires 2. | $1.95 | ||
| 67-72 Bellhousing To Block Bolts Short | Each | ||
| 1967-72 Bellhousing to block short bolts, requires 4. | $2.65 | ||
| 67-72 Bellhousing To Block Bolts Long | Each | ||
| 1967-72 Bellhousing to block long bolts, requires 2. | $1.95 | ||
| 67-72 Bellhousing Mounting Bolt Washer | Each | ||
| 1967-72 Bellhousing to block mounting bolt washer, requires 6. | $.35 | ||
