|
A/C
Conversion
|
Descriptions
in Blue are
hyperlinks to pictures and or larger description.
Left = Drivers Side, Right = Passengers Side |
| Part
# |
Description |
Price |
Quantity |
| 1967-72
Complete
Heater & A/C Conversion |
Kit |
| 354437 |
Everything
you need with the exception of engine heater hose, a compressor drive belt
and the freon. These are R134A or R12 compatible system's. Choose
from a Old Air in dash or under dash vent version. Specify style in cart.
We carry only Old
Air A/C conversion kits and these are
backed with Old Air's expert customer tech service and warranties. These
systems are by far the best on the market. On final checkout page state in
customer comments if power steering equipped and location of pump,
alternator location, and short or long water pump and choice of R12 or
R134A. We also require that you fill out the form on truck information for
engine size. These are complete Heat&A/C units which replace all your
current heater or heat & A/C boxes both under the hood and in the cab.
For 1967-72 Truck, Suburban, Panel, Blazer & Jimmy |
MSRP
$1095.00
OUR
PRICE
$965.00 |
|
| |
| 1967-72
Complete Heater & A/C Conversion With Factory Style Vents |
Kit |
| 1159521 |
Same
as the above kit but comes as in-dash only but with adapters for using
your factory style vents
in-dash vents rather than the Old Air style. On final checkout page state in
customer comments if power steering equipped and location of pump,
alternator location, and short or long water pump and choice of R12 or
R134A. We also require that you fill out the form on truck information for
engine size & if originally a A/C or non-A/C truck. Designed
specifically for 1967-72 Truck, Suburban, Panel, Blazer & Jimmy In
cart you have the additional option of adding new factory vents to kit
with either paintable black housings or chrome housings for a additional
$125.00 |
MSRP
$1060.00
OUR
PRICE
$960.00 |
|
| |
| 1967-72
Heater & A/C Conversion Inside Kit |
Kit |
| 1159522 |
This kit
is available with your choice of either the Old Air style under-dash or
in-dash vents with hoses, the hurricane heat&cool unit, duct hosing,
mounting brackets & hardware, wire harness, and everything required to
integrate the unit with your current heater controls. You must furnish all
under-hood parts such as condenser, lines, valves,
compressor&brackets, receiver/drier, binary safety valve switch. We
require that you fill out the form on truck information for if it was
originally a A/C or non-A/C truck. Designed specifically for 1967-72
Truck, Suburban, Panel, Blazer & Jimmy |
MSRP
$495.00
OUR
PRICE
$455.00 |
|
| |
| 1967-72
Heater & A/C Conversion Inside Kit With Factory Style Vents |
Kit |
| 1159523 |
This
kit comes with Factory style in-dash vents with hoses, the hurricane
heat&cool unit, duct hosing, mounting brackets & hardware, wire
harness, and everything required to integrate the unit with your current
heater controls. You must furnish all under-hood parts such as condenser,
lines, valves, compressor&brackets, receiver/drier, binary safety
valve switch. Be sure to specify in truck information section in checkout
whether truck is originally non-A/C or A/C to be sure you receive the
correct kit to integrate with your controls. Designed
specifically for 1967-72 Truck, Suburban, Panel, Blazer & Jimmy |
MSRP
$560.00
OUR
PRICE
$510.00 |
|
| |
| 1967-72
Condenser Single Fan Kit |
Kit |
| 1159524 |
1967-72
Condenser single fan kit. Includes a superflow electric fan, mounting
hardware, and condenser fan wiring kit with detailed instructions. These
install directly in front of the condenser to the condenser. The benefits
of using one of these is it enhances the cooling system performance which
helps to eliminate overheating and extremely high A/C head pressures
resulting in maximum system performance in extremely high temps especially
in heavy, slow moving or stopped traffic conditions. Designed
specifically for 1967-72 Truck, Suburban, Panel, Blazer & Jimmy |
$149.95 |
|
| |
| 1967-72
Condenser Dual Fan Kit |
Kit |
| 1159525 |
1967-72
Condenser dual fan kit. Includes a pair of superflow electric fans,
mounting hardware, and condenser fan wiring kit with detailed
instructions. These install directly in front of the condenser to the
condenser. The benefits of using one of these is it enhances the cooling
system performance which helps to eliminate overheating and extremely high
A/C head pressures resulting in maximum system performance in extremely
high temps especially in heavy, slow moving or stopped traffic conditions.
Designed specifically for 1967-72 Truck,
Suburban, Panel, Blazer & Jimmy |
$199.95 |
|
| |
|
|
|