GMCPauls Truck Parts
Services ] FAQS ] TIPS ] Policies ]
  Phone-(765)569-2906 / Fax-(773)-442-0103
505 Adams Drive,  Rockville, IN,  47872
Email- robbinspd1199@yahoo.com

Home ] Up ] 72 Chevy ] 1972 SWB ] 2000 GMC SL ] 69 C2500 ] 72 Suburban ] 60 GMC ] 48 Chevy ] 68 Chevy ] 91 GMC Burb ] 72 GMC Sierra Grande ] 72 GMC Sierra ] 70 C-10 ] 49 Pro Street ] 72 GMC Sierra ] 66 GMC ] 67 Chevy ] [ 85 Chevy ] 69 Chevy Panel ] 69 Chevy Stepside ] 55 GMC ] 72 GMC ] 69 GMC ] 70 CST ] 69 Custom 10 ] 72 C10 ] 72 Sierra ] 1972 GMC ] 69 Chevy 4x4 ] 68 Stepside ] 57 Napco GMC CARRYALL ] 84 K10 ] 72 Custom 10 ] 71 C20 ] 72 GMC Burb ] 72 Fleet ] 72 GMC 2500 Custom ] 92 GMC ] 68 Chevy C10 LWB ] 87 GMC ] 66 Chevy Fleet ] 70 Chevy Longhorn ] 94 Chevy Sportside ] 72 GMC 1500 SC ] 98 GMC YUKON ] 1970 Chevy 4x4 ] 1972 GMC Sierra Grande ] 69 CST ] 90 GMC Suburban ] Saunders 72 ]

 

1985 Chevy

SOLD

It is a 1985 ton shorty with a 91 front. The suspension has been dropped 4 inches front and rear 295-50-15 tires all the way around & mounted on eagle 15x10 wheels Viper red paint / black emron engine bay underside and wheel wells The rear end is a GM 10 bolt with 410 gears&posi unit locked and hardened GM axels Custom built drive shaft that weighs about half the amount of an original& The engine is a 350 4-bolt mains .60 over balanced blue printed/magnafluxed and hard dipped lower end. The block was decked and de-burred all oil and water journals opened up. A 400 forged 1035 steel crank ... lightened and balanced. Speed pro flat top forged aluminum pistons with lsky forged aluminum rods. Balanced and shot peened. Some call it a 383 cubic incher & some call it a 408. I call it a 9000 rpm SCREAMING small block. It has a trick flow competition aluminum heads, 202 valves, 160 valves & triple grind titanium valves and retainers all from trick flow The heads have been ported and polished. Bench matched to the Weiand Team g intake 850 double pump carb, rejetted to street use Pete Jackson gear drive& and a crane roller valve train&the cam is a Lunati custom grind with a 0.688 / .692 lift and 263 / 268 duration at .050 inch separation degrees of 112. billet alt and billet pulleys / Holley race flow mech fuel pump 8 quarts oil & ARP bolts etc&. Milodon high volume oil system and K&N air filter, dynomax ceramic headers and 3 inch dynomax exhaust all the way to the back. MSD ignition with a GM hei blazer coil. Turbo 350 trans with B&M valve body and converter the stall has near stock to prevent the frame from twisting. It was on the dyno last summer at Camaro fest, 525hp@6800rpm at the rear wheels and 454 ft lbs of torque at 6200 rpms & ran a 12.08 @ 119mph on the same street tires at Super Chevy in Norwalk Ohio last summer. I had to see what she could do once you get going and the tires hook up, JUST HOLD ON!!!!! this truck only has 10500 true miles on it 15000.00 or trade? I have more pictures.
SOLD

 

GMCPauls Truck Parts
Phone-(765)569-2906 / Fax-(773)442-0103

 505 Adams Drive,  Rockville, IN,  47872
  Email- robbinspd1199@yahoo.com